Signal to Noise » emulator http://macvoip.com/stn Teddy Wallingford, Rock and Roll CEO Mon, 06 Feb 2012 16:41:02 +0000 en hourly 1 http://wordpress.org/?v=3.0.1 How to Run UAE Amiga Emulator on the Wii http://macvoip.com/stn/2009/12/02/how-to-run-uae-amiga-emulator-on-the-wii/ http://macvoip.com/stn/2009/12/02/how-to-run-uae-amiga-emulator-on-the-wii/#comments Wed, 02 Dec 2009 14:30:47 +0000 Ted Wallingford http://macvoip.com/stn/?p=920 Oddly, it’s really not hard to run UAE on the Wii, but the existing documentation that’s out there is kind of confusing and incomplete.  So here it is — how to get the UAE Amiga Emulator running on your Nintendo Wii.  Here are the steps I used to build my setup:

1 – The Nintendo Wii should be menu version 4.2u. Newer versions may work but watch those automatic system updates from Nintendo as they can break the software pre-reqs used by the Amiga emulator.

2 – Obtain a 2 GB SD card.  This card must be a non-SDHC card and the 2 GB size limit is the real deal. The Nintendo Wii will not work with a larger card without some hacking.  So save yourself the trouble (and coin) and just get a 2 GB card. This card will be used to load the Amiga emulation and floppy images later on.

3 – Download and install the Homebrew channel for Wii.  This is a piece of software required to launch the Amiga emulator and other hacker projects.  Note that by installing the Homebrew channel, you’re essentially voiding your Wii’s warranty.   These easiest way to obtain Homebrew is the Hackmii installer, available here. Here are the instructions for this step:

Navigate to Bannerbomb.  Download and unzip Bannerbomb onto the SD card. Next you download the Hackmii Installer and unzip it, copying installer elf to the card’s root and renaming it to boot.elf.

Note: If you have already used the SD card to attempt an install of homebrew the you could have a file on your SD card called boot.dol or a folder called private.  Delete or rename them.

4 – Once Homebrew is running (it will show up as a Channel on the Wii Menu), take your SD card back to your computer and delete everything on it.

5 – Download Simon Kagstrom’s UAE port for Wii and extract the zip file to the root of the SD card. There should be two folders — one called uae and one called apps.  You won’t need to do anything with the folder called apps, but the uae folder is where you’ll place your Amiga ROM files and floppy disk images.

6 – Obtain Amiga ROMs.  The easiest (and legal) way to do this is do purchase Cloanto’s Amiga-licensed (yes, the Amiga license holders are real people with real lawyers who actually exist) emulation product for PC and Mac, called Amiga Forever.   Copy the ROM files from the Amiga Forever CD-ROM into the /uae/roms folder on the SD card.  They should be called “kick13.rom”,  ”kick20.rom”, and so forth depending on the version of the Amiga you plan to boot.

7 – Obtain Amiga floppy images (games).  A great site is thegamearchives.com.  Save these ADF files into the /uae/floppies folder on the SD card.

8 – Re-insert the SD card into the Wii and launch the Homebrew channel.  You should now have a working Amiga.  Use the Wiimote to control the Amiga (keyboard support is extremely limited at this point but workable for most programs).

9 – Enjoy!

]]> http://macvoip.com/stn/2009/12/02/how-to-run-uae-amiga-emulator-on-the-wii/feed/ 736